ZTE WiFi F30 Measurement: Self developed chip has power and network

Now it is impossible to imagine what the world would be like without the network. Most of the information everyone touches is basically transmitted through the network, and most devices need to work with the help of the network. Many scenes need to be convenient to use the network, such as outdoor live broadcast, temporary networking, surveillance camera and other special environments. In these scenarios, it is unrealistic to temporarily pull the network cable without WiFi. The mobile phone will consume electricity and heat up traffic when it is turned on. The network will be very unstable when you walk around to answer and make calls.

Is there a device that supports the network without pulling the cable, and the network is available when there is power, and the traffic is cheap enough? The ZTE portable WiFi F30 brought to you today can perfectly solve the Internet problem.

20221215_47_326344_0_1.jpeg

ZTE F30 portable WiFi uses ZTE V3 series self-developed chips, coupled with a higher configuration of 8-layer and 1-step gilding process. It has low radiation and better heat dissipation. There are also heat dissipation holes on the side of the fuselage. With good performance and heat dissipation capacity, the F30 mobile signal is more secure and stable, and the Internet experience is superior. The product is also small and portable, with a weight of only 25g. Its overall shape is similar to that of a USB flash drive. It is also very convenient to carry out and does not occupy any space at all.

20221215_47_832218_1_2.jpeg

Open the front protective shell of F30 to see the USB-A power supply interface. USB-A is a very common interface at present. I have tried three power supply methods.

Mobile phone charging head

20221215_47_050979_2_3.jpeg

It is the most common way to use the mobile phone charging head to supply power. After all, the charging head with USB-A power supply interface is the most common, simple, practical and stable.

Computer power supply

20221215_47_554449_3_4.jpeg

If the computer has a USB-A interface, it can be directly plugged in and used. It is also close to the computer, and the network speed will be faster.

Power supply of power bank

20221215_47_031819_4_5.jpeg

Power supply with power bank is the best way. The F30 can be moved at any time, which becomes a real portable WiFi. Even the limitation of power supply is not considered, and the network is really available anytime and anywhere.

The built-in dual network can see 4K

20221215_47_077168_5_6.jpeg

20221215_47_832240_6_7.jpeg

You are most concerned about whether the network speed is fast or not. The portable WiFi can be simply understood as the hotspot of the mobile phone, and its network speed is consistent with the signal strength of the surrounding base stations. The official data shows that the Wi Fi speed can reach 150 Mbps at most. I also tested it at home.

On the whole, you can watch 4K quality videos, and browse the web and brush Tiktok for daily use.

Later, I conducted several tests outdoors. Within the range of about two meters from the portable WiFi, the downlink rate reached 43Mbps and the uplink rate reached 28Mbps.

20221215_47_346774_7_8.jpeg

Within the range of about 8 meters, the downlink rate has reached 31 Mbps and the uplink rate has reached 30 Mbps.

20221215_47_392896_8_9.jpeg

In the absence of a stall, the downlink rate reaches 28Mbps and the uplink rate reaches 8Mbps within a range of about 15m.

20221215_47_436620_9_10.jpeg

It can be seen that ZTE's portable WiFi F30 can basically achieve the level of network coverage of the whole room. For example, competitive mobile games such as Glory of the King, the network delay is about 24ms, and the experience of playing games with traffic in peacetime is consistent.

In addition, the number of F30 access users can reach 10, and the number of general users' equipment is basically within 10, which is completely sufficient.

20221215_47_091177_10_11.jpeg

ZTE's portable WiFi F30 does not need to occupy an additional phone card. It has a built-in dual card of China Mobile and China Telecom. By scanning the device's own QR code through WeChat, you can bind the device to the officially authorized official account. After completing the flow purchase and real name authentication, the device can access the Internet when powered on. Subsequent users can implement operator network switching, traffic query and management, equipment upgrade and other operations through the official account.

It is worth mentioning that ZTE's portable WiFi F30 uses ZTE's V3 series self-developed chips, which have delivered more than 50 million chips in total.

As one of the few mobile phone manufacturers with cloud, pipe and terminal integrated communication capabilities in China, ZTE terminals are gradually building a "1+2+N" smart ecological product layout, and building a full scene smart ecological 2.0 for sports health, audio-visual entertainment, business travel and family education.

As a part of ZTE's ecological chain, the portable WiFi F30 provides better stable, safe and high-quality communication services for individuals and family consumers through ZTE chips, ZTE traffic and ZTE brand technologies, services and products.

Add a Comment

Your email address will not be published. Required fields are marked *